The use of emamectin benzoate should be done in accordance with the product label instructions and local regulations. Here is a general guideline for using emamectin benzoate, but please note that specific instructions may vary depending on the crop, target pests, and formulation of the product. Always refer to the product label for specific guidance:

1. Precautions and safety measures:

   • Read and understand the product label, including precautionary statements, application rates, and recommended safety equipment.
   • Wear appropriate personal protective equipment (PPE) such as gloves, goggles, long-sleeved clothing, and a respirator if required.
   • Keep children, pets, and unprotected people away from treated areas during application and until the product has dried or as specified on the label.

2. Mixing and preparation:

   • Measure the appropriate amount of emamectin benzoate formulation based on the product label instructions.
   • Fill the spray tank with the required amount of water, usually about half full.
   • Add the measured quantity of emamectin benzoate to the water while agitating.
   • Continue filling the tank with the remaining water.

3. Application:

   • Use suitable equipment for application, such as a calibrated sprayer, to ensure accurate and uniform coverage.
   • Apply emamectin benzoate when the target pests are in their susceptible life stage, as specified on the label.
   • Apply the product according to the recommended rate and timing for the specific crop and pest being targeted.
   • Ensure thorough coverage of the plant surfaces, including the underside of leaves, where pests are present.
   • Avoid spraying during windy conditions to prevent drift onto non-target areas.
   • Take precautions to prevent contamination of water sources, including avoiding application near open water bodies.

4. Post-application:

   • Clean and rinse the application equipment thoroughly after use.
   • Store any unused emamectin benzoate securely and according to the product label instructions.
   • Dispose of empty product containers according to local regulations.